ADAM-5510/TCP/ADAM-5510E/TCP

• The ADAM-5510 series of PC-based programmable controllers has introduced Ethernet-enabled features.
• The new 4-slot ADAM-5510/TCP and 8-slot ADAM-5510E/TCP support HTTP server, FTP server, and e-mail alarm functions.
• These functions can be used to monitor a system via the Internet, acquire data through an FTP connection and send alarms to designated e-mail addresses if a critical situation emerges.
• Both products also support Modbus/TCP server/client functions.
• The ADAM-5510/TCP and ADAM-5510E/TCP can work as a Modbus/TCP client to retrieve data from remote I/Os, and Modbus/TCP server to connect with the HMI/SCADA software.

Features:

• 10/100Base-T Ethernet interface
• Supports Web Server function
• Supports Email Alarm function
• Supports FTP Server and Client functions
• Supports Modbus/TCP Server and Client function libraries
• Supports Modbus/RTU Master and Slave function libraries
• 1.5 MB Flash ROM (960 KB for user applications)
• 640 KB SRAM (384 KB for battery backup)
• ROM-DOS operating system
• Watchdog timer and real-time clock
• 4 serial communication ports
• 4 or 8 I/O slot expansion

AMAX-2210 Series

• Products in the AMAX-2210 Series are used to increase the number of axes for an AMONet.
• RS-485 distributed motion control network.
• These extension slave modules connect serially by a simple and affordable Cat.5 LAN cable, reducing the wiring between driver and controller.
• This is very suitable for highly integrated machine automation applications.
• AMONet. RS-485 has driver specific motion slave modules to support a range of common motor vendors such as: Mitsubishi J2-Super series, Panasonic Minas A type, and Yaskawa Sigma-II.
• Please select the respective cable SCSI-20P or SCSI-50P and plug this cable into the motor driver and motion slave module.
• AMONet. RS-485 also supports a general purpose motion slave module for general motor drivers, including step motor drivers.
• This general purpose motion slave module is designed with many detachable terminals to support easy wiring.

Features:

• DIN-rail mounting (L x W x H): 125 x 47.6 x 156 mm
• Max. 20 Mbps transfer rate
• Max. 6.5 MHz, 1-Axis pulse output
• 28 bits counter for incremental encoder
• Programmable acceleration and deceleration time
• T-curve and S-curve velocity profiles support
• Change speed on-the-fly
• Easy installation with RJ45 phone jack and LED diagnostic
• Easy installation for servo or stepping motor driver