>

                                                                   MICROCONTROLLER TRAINER KIT

ALS-SDA-51ME

CPU

8031 / 8051 operating at 11.0592 MHz

MEMORY

EPROM1 32KB bytes with monitor software

EPROM2

Optional – 32KB ROM

RAM1

32 KB Data RAM

RAM2

32 KB program/Data RAM

I/O PARALLEL

48 I/O lines using two 8255

I/O SERIAL

0ne RS232 compatible interface

TIMER

Three 16 bit counter /timer using 8253

KEYBOARD

Consisting of 28 numbers of computer grade keys

DISPLAY

Six numbers of seven segment displays

BUS SIGNALS

All bus signals are terminated in berg stick. Controller specific lines like port 1 lines TO T1, INTO, INT1, etc. are terminated in a burg stick header

MONITOR SOFTWARE

32KB of powerful user friendly monitor software with keyboard and serial modes

ALS-SDA-51MEL

CPU

8031 / 8051 operating at 11.0592 MHz

MEMORY

EPROM1 32KB bytes with Monitor Software

EPROM2

Optional – 32KB ROM

RAM1

32 KB Data RAM

RAM2

32 KB Program/Data RAM

I/O PARALLEL

48 I/O lines using two 8255

I/O SERIAL

0ne RS232 compatible interface

TIMER

Three 16 bit counter /timer using 8253

KEYBOARD

External PC-AT Keyboard

DISPLAY

Alphanumeric LCD module(2 Lines x 16 characters)

BUS SIGNALS

All bus signals are terminated in FRC connectors. On chip port lines P1.0 to p1.7 TO, T1, INT1, INTO are also terminated

MONITOR
SOFTWARE

32KB of system monitor, which allows the user to enter, verify, debug or execute the program either from the on-board PC keyboard and display or through serial mode. On-line assembler using PC keyboard and LCD display

ALS-SDA-51H

CPU

8031 / 8051 operating at 11.0592 MHz

MEMORY

EPROM1 32KB bytes with monitor software

RAM

32 KB program/Data

EPROM2

Optional – 32KB ROM

I/O PARALLEL

24 I/O lines using 8255
OTHER FEATURES SAME AS SDA – 31ME EXCEPT TIMER (8253)

ALS-SDA-89C61X2

In System Programmable 89C61X2 Microcontroller board

 

Philips 89C61X2 8 bit Microcontroller with 64K bytes in system Programmable Flash memory

Operating at 11.0592Mhz with external crystal

RS232 C compatible serial Interface; also needed during In System Programming

On board two digit, Seven Segment display and 4 key pad

On board Interface to LED and two push buttons

Ports 0,1 & 2 are terminated in a 26 pin FRC connector and is compatible with ALS standard external interfaces

Two FRC connectors (10 pin and 20pin) for connecting to external interfaces

Power supply provided through 9 pin D-Sub male connector

A number of interface models are available that allow the user to conduct specified experiments

ALS-SDA-89C61X2

FLASH PROGRAMMABLE EVALUATION BOARD

 

SPECIFICATIONS

Flash programmable AT89C51ED2 microcontroller with operating frequency of 11.0592Mhz. The controller has 64KB of in system programmable flash memory
1792 bytes of external (XDATA)RAM & 2048 bytes of EEPROM. On chip peripherals like timers, SPI interface, programmable counter array (compare/capture & PWM)UART and general purpose I/O ports provide enhanced features.On board LED’s, On board push button switches,

 

16x2 line LCD alphanumeric displayRS 232 C compatible serial interface for

Communication, ISP, SPI compatible 2 channels 12 bit ADC with temperature sensor

Interface, A 26 pin FRC connector CN3 connected to ports 0,1 & 2 of the controller for

Easy interface to ALS standard external interfaces In system programming capability,

Compact & elegant enclosure, Operates of 5V DC power.

CYGNAL C8051F020 CONTROLLER BOARD

 

Cygnal’s C8051F020 Higher end Microcontroller operating at a Frequency of 18.432 MHZ with an External Crystal and a supply voltage of 3.3 V

A low-noise low drop out Regulator to provide a voltage of 3.3 v as required by the controller

A 26-pin FRC connector is compatible with our standard external experimental interfaces

An 8-pin berg consisting of SMBUS (System Management Bus) signals for communication with an RTC DS1307 and an External Interrupt line

A 10-pin Header for In System Programming / Debugging of FLASH through JTAG with the help of a serial adapter, provided with the Evaluation kit

PERIPHERAL EXPANSION BOARD

The Peripheral Expansion Board based on External Memory Interface Consists of

 

A 60-pin FRC connector for Bus connection

An 8-pin berg for System Management Bus lines and External Interrupt line

RTC (DS 1307 Read & Write through SMBUS), LCD display and ASCII keyboard, interface through 8255 PPI (the ASCII keyboard interface is implemented as a parallel 8 bit with handshake connection between the 8255 and an on card 89C2051 Microcontroller which connects to an external keyboard), 32KB External RAM, Additional 8255 for other standard interfacing purposes, RS-232 serial interface (through UART0), RS-485 serial interface (through UART1)

CONTROLLER INTERFACE JIG

The Controller Interface Jig consists of the following:

 

A 20-pin FRC Connector which connects to the Controller Board for studying the features of the controller like Analog Comparator, 8-bit ADC, 12-bit ADC, 12-bit DAC, PCA (programmable counter array) features (8-bit PWM, 16-Bit PWM, HS o/p, S/W Timer etc,) Internal Counter/Timers and External Interrupt

A 26-pin FRC Connector which also connects to the Controller Board and interfaces to two 7 –segment Displays, 3x3 Keyboard Switch Matrix, two Push buttons, two Switches, two LEDs and a 4-way DIP switch

CYGNAL C8051F020 MICROCONTROLLER

SPECIFICATIONS

 

High-Speed pipelined 8051-compatible CIP-51 Microcontroller Core. Execution speed of up to 25 MIPS at the clock frequency of 25 MHZ

64KB of In System Programmable FLASH. 4352B of Internal Data RAM (4KB+256B)

Supply Voltage: 2.7V to 3.6V Precision VDD monitor/Brown out Detector and on chip watch dog Timer

On chip JTAG Debug and Boundary Scan. C8051F020 controller consists of the following configurable features : One 12-bit ADC, one 8-bit ADC, two 12 bit DACs, two voltage comparators, one Hardware SMBUS (System Management Bus) for two wire Serial communication, two UART Serial Ports (UART0 and UART1), one SPI (Serial Peripheral Interface) capable of providing full duplex Serial communication, Programmable Counter Array (features like Edge capture, Software Timer, High Speed output, Frequency Output, 8-bit and 16-bit PWM), five general purpose 16-bit Timer/Counters, Eight 8-bit ports (P0-P7)